Walk-ins • Reach-ins • Refrigerated display cases
Defrost System Repair in Westchester, Putnam & Yonkers
On-site diagnosis and repair of commercial refrigeration defrost systems in Port Chester and the surrounding area: defrost clocks, heaters, termination sensors, control wiring, and cycle settings for walk-in coolers and freezers, reach-in refrigerators and freezers, and refrigerated display cases.

Commercial Refrigeration
Follow the defrost cycle from control to coil.
An iced evaporator can involve a stalled timer, a disconnected or damaged heater, or a sensor that ends defrost before the ice clears. Cyclone HVACRWD checks the timer mechanism and electrical supply, measures heater amperage, examines sensor readings and wiring, and observes the cycle and drainage at the evaporator. Our service videos include walk-in systems, upright freezers, undercounter refrigerators, and display cases, with work on both mechanical clocks and digital controls. Some calls also involve fan or refrigeration faults, so the diagnosis follows what the equipment actually does during and after defrost.
FROM OUR SERVICE CALLS · INSTAGRAM
Defrost system repairs
Walk-ins, reach-ins & refrigerated display cases
Deshielo comercial · Cuartos fríos, refrigeradores y vitrinas
Real service calls on commercial refrigeration defrost systems: timer diagnosis and replacement, heater amperage checks, termination sensors, control wiring and cycle adjustments.
Ejemplo en revisión · clasificación basada por ahora en la descripción del video.
Scroll inside the video window for earlier work
No videos have been published in this section yet.
When to request service
Signs your defrost system needs checking
Ice covers the evaporator coil or pan and blocks air movement through the equipment
The defrost clock sticks, its gears slip, or the equipment stays stopped at the timer
Defrost ends while a solid block of ice remains, or the programmed cycle lasts too long
The controller shows an error or an unexpected sensor reading, or fans fail to restart after defrost
Repair scope
What we check and repair
- Mechanical defrost clocks: motor and gear movement, contacts, manual switching, replacement mechanisms, and installation of wired timer boxes
- Digital controls and defrost schedules, including cycle duration, manual defrost tests, and the return to refrigeration
- Evaporator and drain-pan heaters, checked with clamp-meter amperage readings; disconnected heater wiring and burned pan-heater replacement
- Defrost termination probes and bimetal controls, with sensor and controller readings, wiring inspection, and replacement of faulty probes
- Electrical supply to the defrost control, voltage at timer contacts, and tracing disconnected or damaged control wiring
- Ice removal from the evaporator and pan, checks that the drain is clear, and observation of fan operation after defrost
Servicio en español
Diagnosticamos y reparamos sistemas de deshielo de cuartos fríos, congeladores, refrigeradores comerciales tipo reach-in y vitrinas en Port Chester, Westchester, Putnam y Yonkers. Revisamos relojes, resistencias, sondas de fin de deshielo, cableado y programación del ciclo, junto con el hielo del evaporador y el drenaje de la bandeja.
Cuéntenos qué marca el controlador, dónde se acumula hielo y si los ventiladores funcionan. Envíe fotos de la placa de datos y del equipo a través de nuestra solicitud de servicio en español.